Peavey Tri-Flex II 1000W Portable PA System
R27,495.00
Peavey Tri-Flex II PA System “Stand Included” – 1000W Three-Piece, Two-Channel Sound System
Availability: Out of stock
Product Description
The Triflex II is a 1000 Watt three piece, two-channel sound system, already tweaked and ready to go for sound reinforcement, DJ gigs, and various music playback duties. Consisting of a shared Subwoofer cabinet and a pair of Satellite speakers, the system has been pre-engineered for a balanced sound and a crisp, punchy presentation. The three-way effective performance that the system is capable of provides a clear sound at high output levels, with plenty of punchy bass.
Features:Â
- 1000W Active Two-Channel Three-piece Speaker System
- One shared Subwoofer cabinet which houses the inputs and power amps
- Two two-way Satellite speakers with speaker pole stand adaptors
- Subwoofer has 15″ woofer, with 500W peak available power
- Satellite speakers have 10″ woofer, RX 14 1.4″ compression driver tweeter
- 250W peak available power to each Satellite speaker
- Peavey’s exclusive DDT compression on the Satellite power amps
- System comes with two 15 foot speaker cables
- Protective slipcover with cable storage pockets and built-in Velcro retaining straps
- Heavy-duty locking casters on Subwoofer cabinet for transport of system
- Satellite speakers nest on top of the Subwoofer, help ease transport
- Four-pin twist-lock connectors on amplifier outputs and Satellite inputs
Complete System
Active Crossover Frequency : 120 Hz, 24dB/Octave
Maximum Sound Pressure Level : 129 dB
Speaker Cables : Two 15 foot 16 ga. with 4-pin twist-lock connectors on each end
Dimensions (H x W x D) : 43″ x 20.37″ x 23.54″ (Includes all feet)
Weight (Sub and Satellites Only) : 146 lbs (66.4 kg)
Satellite Speakers
Transducer Complement : Low Frequency Section: 1 x 10″ woofer, custom heavy-duty
Nominal Impedance : 4 Ohms
Power Handling, Satellite System : 200W Continuous, 400W Program, 800W Peak
Box Tuning Frequency (Fbox) : 84 Hz
Frequency Response : 88Hz to 20 kHz
Sound Pressure Level : 101 dB Maximum Sound Pressure Level (1 meter, 1/2 space): 124 dB
Dimensions (H x W x D) : 19.6″ x 11.83″ x 11.83″ (Upright, Includes feet)
Weight : 24 lbs (10.9 kg)
Subwoofer
Transducer Complement : 1 x 15″ woofer, custom heavy-duty
Nominal Impedance : 8 ohms
Power Handling, Transducer : 350W Continuous, 700W Program
Box Tuning Frequency (Fbox) : 48 Hz
Frequency Response : 40 Hz to 105 Hz
Usable Low Frequency Limit (-10 dB point) : 34 Hz
Sound Pressure Level : 102 dB
Maximum Sound Pressure Level : 127 dB
Dimensions (H x W x D) : 19.65″ x 28″ x 28.10″ (Inc. ft)
19.65″ x 32″ x 28.10″ (Incl. feet & casters)
Weight : 98 lbs (44.5 kg)
Internal Amplifier
Subwoofer Amp Power Output : 500W peak available power; 250W continuous,into 8 ohms
Satellite Amps Power Output : 250W peak available power; 125W continuous, into 4 ohms
Inputs (Line Level) : Left channel XLR or 1/4″ phone jack combo input (female)
Input Impedance : 20 k Ohms balanced, 10 k Ohms unbalanced (single-ended)
Thru (Outputs, Line Level) : Left channel XLR full-range output (male), Right channelXLR full-range output (male)
Controls
Nominal Amplifier Frequency Response : +0, -2 dB from 10 Hz to 20 kHz
Hum and Noise : Greater than 90 dB below rated power
DDT Dynamic Range : Greater than 18 dB
THD : Typically less than 0.05 %
Infrasonic Filter Protection : 36 dB/octaveroll-off
Power Requirements : Domestic 120VAC,60 Hz, 210 Watts
Reviews
There are no reviews yet.